|
This is a Display model, Like new - never been used.
The amplifier shall be solid-state two-channel model. Each amplifier channel shall have the ability to operate individually, or paired with other channel in a bridge configuration to provide increased output voltage over that of an individual channel output.
Features:
CH SERIES DRIVES MULTIPLE IMPEDANCES:
* CH Series provides for both low impedance or high impedance outputs per channel.
* Each channel offers 4/8 ohm, 70V and100V operation on CH1 and CH2, and 4/8 ohm and 70V on CH4.
* Loads can be mismatched, allowing for independent operation per channel.
CH SERIES INCLUDES HPF PER CHANNEL:
* All CH Series include a 70 Hz High Pass Filter per channel, providing necessary low frequency roll off to eliminate saturation of constant voltage step down transformers typically used in 70V and 100V distributed systems.
SHALLOW CHASSIS DESIGN:
* The CH 1, CH 2, and CL 1, and CL 2 use shallow chassis’, allowing for installation in most wall-mount equipment racks.
SECURITY:
* Rear panel level controls for secure operation.
* Precision detented level controls allow for accurate level settings in many fixed installation applications.
CONTRACTOR CORRECT CONNECTORS:
* Barrier strip output connectors allow for quick easy connection, regardless of the load.
* Barrier strips accept up to 10 Awg. crimp-on terminal forks.
5-WAY FAULT INDICATOR
* 1) blinks during power-mute; 2) excessive heatsink temperature; 3) transformer thermal protection; 4) short at amplifier output;
5) output stage non-operational.
FLEXIBLE INPUT OPTIONS
* Active crossover with signal routing available with optional System Solution Topology
modules (SST-SBSC, SST-SX and SST-MX).
CL SERIES AND 2 OHM OPERATION:
* When low impedance is the only requirement, the CL Series includes high power 2 ohm operation.
THE BEST VALUE ON THE MARKET:
* Dollar per Watt comparisons in this class prove how the new CH/CL Series’ are hard to beat.
* CH2 Stereo Mode:
4 Ohms @ 660w
8 Ohms @ 400w
70 Volt @ 600w
100volt @ 600w
* CH2 Bridge Mode:
8 Ohms @ 1320w
140volt @ 1200w
200volt @ 1200w
|
