|
The Furman AR-15 II Voltage Regulator Power Conditioner delivers a clean, constant flow of power while offering solutions to the many noise problems common to today's AC power supply. The Furman AR-15 II is the only regulator that filters and purifies AC power to reduce line noise and ensure optimum performance. Features 8 outputs on the back and one on the front. The AR-15 II delivers a stable 120 volts of AC power at 15 amps to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which+ can cause sensitive electronic equipment to malfunction or sustain damage. The AR-15 II accepts any input voltage from 97V to 141V and transforms it to a constant 120V (+/- 5V).
Specifications:
* Spike Protection Modes: Line to neutral, zero ground leakage
* Spike Clamping Voltage: 188 Vpk @ 3,000 amps, 133 VAC RMS
* (tested to UL-1449 6,000 Vpk @ 3,000 amps)
* Response time: 1 nanosecond
* Maximum surge current: 6,500 amps
* Voltmeter Accuracy: ±5V
* In Regulation Ranges: AR-15 II: Provides regulation ±5V in 120V mode from 97 to 141V
* AR-15 IIJ: Provides regulation ±4V in 100V mode from 80 to 122V.
* Noise attenuation:10dB @ 10kHz / 40dB @ 100 kHz / 100dB @ 10MHz
* Linear attenuation curve from 0.05 - 100 ohms line impedance
* Shutdown Range: Above 137V
* Dimensions:
* 19" W x 11.63" D x 1.75" H (48.26 x 29.54 x 4.45 cm)
* Weight: 14.5 lbs. (6.58 kg)
* Current Rating: The AR-15 II is capable of 15 amps for input voltages of 124V (104V in 100V mode) or higher; derate at 113 mA per volt to a minimum of 12:3A
* Three Year Limited Warranty:
* The AC-15 II is protected by a limited three-year warranty covering defects in materials and workmanship. (See manual for details.)
Features:
* Delivers 120 ±5 VAC whenever the input AC line voltage is between 97V and 141V
* Linear Filtering Technology (LiFT) with zero ground contamination
* Series Multi-Stage Protection Plus (SMP+) with Extreme Voltage Shutdown (EVS)
* Output capacity 15 amps
* Low noise torodial autoformer
* BNC connector on the rear panel allows you to attach any standard 12V goose neck lamp to illuminate the rear of your rack
* 8 outlets on the back panel, one on the front
|
