|
Over the years, Studiophile reference monitors have earned a great reputation with recording professionals around the world. The BX8a updates our critically acclaimed BX8 near-fields. Topping the improvements list are our 8” curved Kevlar low-frequency drivers—a technology usually reserved for monitors bearing a higher price tag. Of course, they’re coupled with our time-proven high-temperature voice coils and damped rubber surrounds for durability and fidelity. Magnetically shielded 1” natural silk domes give the BX8s a high-end that’s both clear and easy on the ears. Custom-tuned crossovers distribute 130 Watts of bi-amplified power for optimal frequency handling by each driver. Hear for yourself why Studiophiles have become “standard issue” reference monitors.
Kevlar LF drivers
To insure a lifetime of service, we constructed the BX8a’s 8” low-frequency driver from woven Kevlar—the same material bulletproof vests are made from. (Kevlar is typically reserved for more expensive monitors.) Our engineers also created a curved conical design that improves room dispersion. High-damping rubber surrounds insure that the cone reaches exactly its optimal excursion for accurate reproduction. And our high-temperature voice coils guarantee that your monitors will deliver full performance no matter how many hours you use them.
Silk-dome HF drivers with FerroFlow™
Our high-frequency domes are made from natural silk to counter the ringing that is inherent in the stiffer metallic materials common to other monitors. M-Audio’s FerroFlow™ technology uses ferrofluid liquid cooling to dissipate heat for maximum efficiency and extended usage.
Bi-amped efficiency
Active (powered) monitors allow designers to optimize amplification for other components such as speakers and cabinets. And by using two separate power amps and a finely tuned crossover, the BX8a’s bi-amped design insures that both the high- and low-frequency drivers are each sent only the frequencies they reproduce most efficiently.
Rear-ported cabinet design
The BX8a’s cabinet is integrally designed with its other components for optimal performance—right down to rounded corners for reduced edge diffraction and superior imaging. Custom rear-port design eliminates the turbulence and resulting distortion caused when front ports project low frequency waves in the same path as the speakers’ direct signal.
M-AUDIO Studiophile BX8a full features
* two-way studio reference monitors
* stylish design
* 130 Watts of bi-amplified power
* 8” low-frequency drivers with: curved Kevlar cones, high-temperature voice coils, damped rubber surround
* 1” natural silk high-frequency drivers
* magnetically shielded
* XLR balanced and 1/4” balanced/unbalanced inputs
* volume control
* power indicator
M-AUDIO Studiophile BX8a specifications
* frequency response: 40Hz-24kHz
* crossover frequency: 2.2kHz
* crossover filter network: 4th-order Linkwitz-Riley
* amplifier type: class AB monolithic
* low-frequency amplifier power: 70 Watts RMS into 4 ohms (woofer) at 0.5% (-46 dB) THD
* high-frequency amplifier power: 60 Watts RMS into 6 ohms (tweeter) at 0.5% (-46 dB) THD
* maximum signal-to-noise (dynamic range): > 100dB (typical A-weighted)
* polarity: positive signal at + input produce outward LF cone displacement
* input impedance: 20k ohms balanced,10k ohms unbalanced
* input sensitivity: 85 mV pink noise input produces 90dBA output SPL at one meter with volume control at maximum
* power: factory programmed for either 115V ~50/60Hz or 230V ~50/60Hz
* protection: RF interference, output current limiting, over temperature, turn-on/off, transient, subsonic filter, external mains fuse
* cabinet: vinyl-laminated MDF (enclosure natural Helmholtz resonance frequency: 30 Hz)
• size: 12” x 10” x 15”; 30.48cm x 25.4cm x 38.1cm
|
